EN Seamless Pipe

Steel Grade Dimension Dimension Tolerance

Standard No	Steel Grade	Standard Name	Dimension Range
EN 10208	L210GA,L235GA,L245GA,L290GA, L360GA,L245NB, L290NB,L360NB, L415NB, L360QB, LI15QB,L450QB, L485QB,L555QB	Steel Pipes for Pipelines for Combustible Fluids	33.7-1626mm
EN 10210	S235JRH,S275JOH,S275J2H,S355JOH, S355J2H,S355K2H,S275NH,S275NLH, S355NH,S355NLH,S420NH,S420NLH, S46INH,S460NLH	Hot Finished Structural Hollow Sections of Non-alloy and Fine Grain Steels	21.3-1219mm
EN 10216-1	P195TRI,P195TR2,P235TR1, P235TR2, P265TR I, P265TR2	Seamless Steel Tubes for Pressure Purposes-1- Non-alloy Steel Tubes with Specified Room Temperature Properties	10.2-711mm
EN 10216-2	P195GH, P235GH, P265GH, 20MnNb6,16Mo3, 8MoB5-4, 14MoV6.3, 10CrMo5.5,13CrMo4-5, 10CrMo9-10, 11CrMo9.10, 25CrMo4,20CrMoV13-5-5, 15 NiCuMoNB-6-4,X11CrMo5+1, X11CrMo5+NTI,X11CrMo5+NT2, X11CrMo9.1+1, X11CrMo9.1+NT, X10CrMoVNb9-l, X20CrNiV11-1	Seamless Steel Tubes for Pressure Purposes-2: Non-alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties	10.2-711mm
EN 10216-3	P275NL I,P275NL2, P355N,P355NH, P355NL1,P355NL2,P460N,P460NH, P460NL1,P460NL2,P620Q,P620QH,P620QL, P690Q,P690QH,P690OL1,P690QL2	Seamless Steel Tubes for Pressure Purposes-3: Alloy Fine Grant Steel Tubes	10.2-711mm
EN10216-4	P215NL,P255QL,P265NL, 26CrMo4.2,11MnNi5-3,13MnNi6-3, 12Nil4,Xl2Ni5,X10Ni9	Seamless Steel Tubes far Pressure Purposes-4: Non-alloy aid Alloy Steel Tubes with Specified Low Temperature Properties	10.2-711mm
EN 10224	L235, L275, L355	Non-alloy Steel Tubes and Fittings for the Conveyance of Water and Other Aqueous Liquids	26.9-2743mm
EN 10297-1	E235,E275,E315,E355,E470, E275K2,E355K2,E420J2,E460K2, E590K2,F730K2 C22E,C35E,C45E,C60E, 38Mn6,41Cr4,25CrMo4,30CrMo4, 34CrMo4,42CrMo4,36CrNiMo4, 30CrNiMo8,4lNiCrMo7-3-2	Seamless Circular Steel Tubes for Mechanical mid General Engineering Purposes-1: Non-alloy and Alloy Steel Tubes	26.9-610mm
EN 10305-1	E215,E235,E355	Steel Tubes For Precision Applications-1: Seamless Cold Drawn Tubes	4-260mm
EN 10305-4	E215,E235,E355	Steel Tubes for precision Applications-4: Seamless Cold Drawn Tubes for Hydraulic mid Pneumatic Power Systems	4-80mm

Outside Diameter "D" (mm)	Wall Thickness "S" (mm)	Outside Diameter "D" (mm)	Wall Thickness "S" (mm)	Outside Diameter "D" (mm)	Wall Thickness "S" (mm)
Calculation of Unit Weight: W = 0.02466 * S * (D-S)
4.0	0.5-1.2	50.0	1.0-10.0	177.8	2.0-50.0
5.0	0.5-1.2	51.0	2.0-12.5	180.0	3.5-20.0
6.0	0.5-2.0	54.0	2.0-14.2	190.0	3.5-22.0
7.0	0.5-2.0	55.0	1.0-12.0	193.7	2.0-55.0
8.0	0.5-2.5	57.0	2.0-14.2	200.0	3.5-22.0
9.0	0.5-2.8	60.0	1.0-12-5	203.0	6.3-65.0
10.0	0.5-3.0	60.3	2.0-16.0	219.1	2.0-65.0
10.2	1.6-2.6	63.5	2.0-16.0	220.0	4.5-25.0
12.0	0.5-4.0	65.0	1.0-14.0	224.5	6.3-14.2
12.7	1.8-3.2	70.0	2.0-17.5	229.0	6.3-70.0
13.5	1.8-3.6	73.0	2.0-17.5	240.0	4.5-25.0
14.0	05-4.0	75.0	1.0-16.0	244.5	2.0-70.0
15.0	0.5-5.0	76.1	2.0-20.0	260.0	5.0-25.0
16.0	0.5-6.0	80.0	1.0.-16	273.0	2.0-80.0
17.2	1.8-4.5	82.5	2.0-22.2	298.5	7.1-80.0
18.0	0.5-6.0	85.0	1.5-16.0	323.9	2.3-80.0
19.0	2.0-5.0	88.9	2.0-25.0	355.6	2.6-100.0
20.0	0.5-7.0	90.0	1.5-16.0	368.0	8.8-100.0
21.3	2.0-5.0	95.0	2.0-18.0	406.4	2.6-100.0
22.0	0.5-7.0	100.0	2.0-18.0	419.0	10.0-100.0
25.0	0.5-8.0	101.6	2.0-28.0	457.0	3.2-100.0
25.4	2.0-6.3	108.0	2.0-30.0	508.0	3.2-100.0
26.0	0.5-8.0	110.0	2.0-18.0	521.0	12.5-100.0
26.9	2.0-8.0	114.3	2.0-32.0	559.0	3.2-100.0
28.0	0.5-8.0	120.0	2.0-18.0	610.0	3.2-100.0
30.0	0.5-10.0	121.0	4.0-36.0	660.0	4.5-25.0
31.8	2.0-8.0	127.0	2.0-36.0	711.0	4.5-60.0
32.0	0.5-10.0	130.0	2.5-18.0	762.0	4.5-50.0
33.7	2.3-10.0	133.0	2.0-36.0	813.0	4.5-36.0
35.0	0.5-11.0	139.7	2.0-36.0	864.0	4.5-36.0
38.0	0.5-11.0	140.0	2.5-18.0	914.0	4.5-36.0
40.0	1.0-11.0	141.3	2.0-36.0	1016	4.5-36.0
42.0	1.0-10.0	150.0	3.0-20.0	1067	5.0-36.0
42.4	2.0-11.0	152.4	2.0-10.0	1118	5.0-36.0
44.5	2.0-12.5	159.0	2.0-40.0	1168	5.0-36.0
45.0	1.0-10.0	160.0	3.0-20.0	1219	5.0-36.0
48.0	1.0-10.0	168.3	2.0-45.0
48.3	2.0-12.5	170.0	3.0-20.0

Standard	Tolerance on Dimension
	Out side Diameter			Wall Thickness		Length
	(mm)
EN 10208	Outside Diameter	Pipe except the end	Pipe end	T≤4	±0.6	Random Length See Table 1. Fixed length shall be delivered with a Tolerance of ±500mm
	D≤60	0.5 ±0.75%D Whichever is the greater	±0.5 ±0.5%D Whichever is the greater	4	+15% -12.5%
	60≤610	0.5 ±0.75%D Whichever is the greater	±0.5 ±0.5%D Whichever is the greater	T≥25	+3.75 -3.0 or ±10% Whichever is the greater
	610≤1430	±1%D	±2.0
	D>1430	By Agreement	By agreement
EN 10210	±1%. with a minimum of ± 0.5 and a maximum of ±10			-10%		See Table 2
EN 10216- (1,2,3,4)	See Table3,Table 4					L≤ 46000	+10 0
						6000 ≤12000	+15 0
						L>12000	+By agreement 0
EN 10224	≤±1%D or ±0.5 Whichever is the greater			See Table5		See Table6
EN 10297-1	See Table 7					L≤6000	+10 0
						6000 ≤12000	+15 0
						L>12000	+17 agreement 0
EN 10305-1	±0.05mm Whichever is the greater			±10% or ±0.1mm Whichever is the greater		L<500	a
						500 <2000	+3 0
						2000 <5000	+5 0
						5000 <8000	+10 0
						>8000	a
						a: an agree unilateral tolerance is specified for the exact length.

Table 1: Requirements for Random Length Groups in EN 10208

Length Group	Length Range For 90% of OrderItem	Minimum Average Length of Order Hein	Shortest Length of Order Item
(m)
r1	6.11	8	4
r2	9-14	11	6
r3	10.16	13	7
r4	11-18	15	8
1) The upper limit is the nixtinum-tvalne for the length of each individual pipe.

Table 2: Tolerances on Manufacturers' Delivered Length in EN 10210

Type of Length	Range of Length or Length L	Tolerance
Random length	4000 ≤ 16000mm with a range of 2000 per order item	10% of sections supplied may be below the minimumn for the ordered range but not shorter than 75% of the inininanut range length
Approximate length	4000mm≤ L ≤1600mm	±500mm
Exact length	2000mm≤L ≤6000mm	-0, +10mm
Exact length	>6000mm	-0, + 15mm

Table 3: Tolerances on Outside Diameter and Wall Thickness in EN 10216 (1, 2, 3, 4)

Outside Diameter -D (mm)	Tolerances on D	Tolerances on T for a T/D ratio
Outside Diameter -D (mm)	Tolerances on D	≤0.025	>0.025 ≤0.050	>0.050 ≤0.10	>0.10
D ≤219.1	±1% or ±0.5nun whichever is the greater	±12.5% or ±0.4mm whichever is the greater
D>219.1	±1% or ±0.5nun whichever is the greater	±20%	±15%	±12.5%	±10%
For outside diameters D≥355.6 mm it is permitted to exceed the upper wall thickiess locally by a further 5% of the wall thiclawss T

Table 4: Tolerances on Outside Diameter and Wall Thickness for Tubes Ordered Cold Finished in EN 10216 (1, 2, 3, 4)

Tolerance an D	Tolerance on T
±0.5% or ±0.3mm whichever is the greater	±10% or ±0.2mm whichever is the greater

Table 5: Tolerances on Thickness for Seamless Tubes in EN 10224

Outside Diameter (mm)	Tolerance on Thidiness for T,`D ratio (%)
Outside Diameter (mm)	≤2.5	>2.5 ≤5.0	>5.0 ≤10.0	>10.0
D ≤219.1	±12.5% or mm whichever is the greater0.4mm whichever is the greater
D>219.1	±20%	±15%	±12.5%	±10%

Table 6: Tolerances for Exact Length in EN 10224

Length-L (mm)	Tolerance an Length
	Tube outside diameter
	<406.4mm	≥406.4mm
2000<L≤6000	-0, +10mm	-0, +25mm
6000<L ≤12000	-0, +15mm	-0, +50mm
L>12000	-0, +by agreement

Table 7: Tolerances on Outside Diameter and Wall Thickness in EN 10297-1

Outside Diameter -D (mm)	Tolerances on. D	Tolerancesmi T for a T/D ratio
Outside Diameter -D (mm)	Tolerances on. D	<0.025	>0.025 ≤0.050	>0.050
D ≤219.1	±1% or ±0.5mm whichever is the greater	±12.5% or ±0.4 mm whichever is the greater
D>219.1	±1% or ±0.5mm whichever is the greater	±20%	±15%	±12.5%